Configuration Panel

The configuration panel comprises the available bus options, toolbar, SD card options, and live monitoring options.

Bus Options

This option is used to configure the CAN bus and LIN bus settings, such as:

• CAN/CAN FD bus speed

• LIN Bus settings

• Silent mode settings

• Bit timings

Tool Bar

The toolbar holds the various functions that can be added to the CAN Bus.

CAN	CAN Icons	Description
Log All		The log All function will enable logging all the CAN/CAN FD messages on the CAN/CAN FD bus.
CAN Errors		CAN Errors function enables logging of CAN bus errors in the data file. See Appendix 1 for various error codes
Filter		The filter function enables you to configure CAN/CAN FD logging by defining CAN/CAN FD ID pass filters.
J1939 Filter		Allows the user to configure J1939 filtering for the source address, destination address, and PGN filtering.
UDS		Allows the user to configure UDS settings
LIN	LIN Tool Bar Icons	Description
Log All		The log All function will enable logging all the LIN messages on the LINbus.
Schedule		Allows the user to use the ReXgen device in master mode by loading the schedule table from the LDF file.
CHANNELS	Channels Icons	Description
Analog		Allows the user to add an analogue channel and set the sampling rate and conversion formula.
Dig in		Allows the user to add digital channels and set the sampling rate.
IMU & GNSS		Allows the user to configure IMU channels and GNSS channels.
Transmitting Options	Transmitting Options Icons	Description
Periodic		Allows the user to configure Periodic Transmission of CAN/CAN FD messages from ReXgen.
HW Info		Allows the user to configure the transmission of Hardware Diagnostics information.
Snapshot		Allows the user to transmit a periodic sample of decoded CAN bus data for select CAN messages of interest in the Jason format.