LIN Bus Options
Clicking on the LIN icon will open the LIN bus settings.
LIN Settings
Protocol Version– This allows the user to choose the protocol version.
Baudrate (bit/s)– This allows the user to define the baud rate for the LIN bus.
Time Base (ms)– This allows the user to schedule LIN frame slots based on a LIN cluster time unit called the LIN time base, usually 5 or 10 mS.
Time Jitter (ms)– This allows the user to delay the tolerance specified for the Master node, which will be available in the LDF file.
Master Mode– This allows the user to activate the master mode, which becomes active when the user loads a schedule table.
Last updated
