# Set the Configuration to SD

A Logger configuration (\*.ivs) can be created in DiaLog and exported. You can use the 'DiaLog Remote' software to set the configuration to the SD Card; once it is inserted into a Logger, it will update the logger, configured to operate as specified within the configuration (\*.ivs).

Click 'Set Configuration to SD'. ![](https://888960721-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FenX58y5hTu5O8sufLoOA%2Fuploads%2Fg93OPHBu5dpGYIw0io2Y%2Fimage.png?alt=media\&token=39052787-ec64-400b-acd2-01535e6e1f4f)

Select the configuration (\*.ivs) you wish to use and click 'OPEN'.

<figure><img src="https://888960721-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FenX58y5hTu5O8sufLoOA%2Fuploads%2FS7cBYohxB6vm3yONab7X%2Fimage.png?alt=media&#x26;token=dfe67639-42d4-45da-a483-ff829b55fdd6" alt=""><figcaption></figcaption></figure>

Wait until you see the configuration loaded on the SD card, as shown:

<figure><img src="https://888960721-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FenX58y5hTu5O8sufLoOA%2Fuploads%2FYTCMIXD6HL5ou5LKLqMF%2Fimage.png?alt=media&#x26;token=14deab0f-e219-4d8a-b95c-f66e015a8321" alt=""><figcaption></figcaption></figure>

Remove the SD card from your laptop or PC and insert it into the logger.