ReXgen 2 IMU FAQs
What happens if the logger storage gets full.
The logger can continue logging after deleting the first file on a FIFO basis or can stop logging and be configured via ReXdesk, which has the option to format the logger (FIFO is enabled by default.)
Is it possible to interface ReXgen 2 IMU with KBOX?
Yes, It will work with Kbox, but you will need to power the KBox from a separate power source since ReXgen doesn’t have Auxilary Power Out
Where can I get the Driver installer?
It is available under the Influx technology folder in the Start menu
Where can I find the Pin out details for ReXgen 2 IMU?
You can find that under the help section in the Rexdesk software
What is the current consuption of ReXgen 2 IMU?
<87mA in full operation and <2mA when CAN is not active
How to get real-time physical data?
The user needs to use the DBC file; post-collection, it can be exported as CSV.
Does the ReXgen logger LEDs indicate status of GNSS logging?
No, Please wait for at least 2 mins before starting the trial. The logger will need a fix from at least four satellites to produce good location data.
Does it support any format other than DBC?
Yes, the logger can log CAN and LIN signals, supporting both DBC and LDF formats.
Are there any other connectors available apart from DB9?
No, But modifications can be done for bulk orders on demand.
Last updated
