LogoLogo
Home
  • 🏠Home
  • Frequently Asked Questions
    • ReXgen Series
      • ReXgen 1 FAQs
      • ReXgen 2 FAQs
      • ReXgen 2 IMU FAQs
      • ReXgen Air FAQs
    • Rebel Series
      • Rebel LT FAQs
      • Rebel CT FAQs
    • K-Series
      • K-Box FAQs
      • K-AN8 FAQs
      • K-TC FAQs
    • Configuration Software(s)
      • ReXdesk FAQs
      • DiaLog FAQs
      • K-CAL FAQs
      • StreamLog FAQs
      • Module Analyser FAQs
Powered by GitBook
On this page
Export as PDF
  1. Frequently Asked Questions
  2. K-Series

K-Box FAQs

PreviousK-SeriesNextK-AN8 FAQs

Last updated 1 year ago

Can we interface ReXgen with K-Box?

Yes, It will work with K-box, but you must power the K-Box separately since ReXgen doesn't have Auxilary Power Out.

Where can I get the Pinout details for a K-Box device?

Where can we get the links to the software associated with K-Box?

Does K-Box log data within the device?

A data logger should be clubbed with K-box to log data. K-Box doesn't store data inside it, but we can have ReXgen/Rebel or any third-party CAN loggers connected with it to store the data.

Is it Possible to interface K-Box with any CAN data logger?

Yes, it is possible.

How to generate DBC for K-Box?

Post the configuration of the K-Box channels, save the settings and then click on export; the software asks for the location and clicks save. It will save the file as >DBC.

What is the thermocouple and ADC resolution and accuracy of K-Box?

Thermocouples ±0.08%. And ADC(16bit)- ±0.0015% of FS

Can current be measured using a K-Box?

K Series analogue input doesn't support logging of current directly. Users can use a current clamp with voltage output.

PinOut details
K-Series Software Links
https://youtu.be/epyMetdvFz0
Page cover image