Rebel Data Logger Connector
Female 25-pin standard D-Type connector with screws
Pin No | Pin Function |
Pin 1 | Analog Input 3 - do not apply voltages outside of the -10 to +10V range |
Pin 2 | LIN 1 |
Pin 3 | CAN/CAN FD 3 L |
Pin 4 | Analog Input 1 - do not apply voltages outside of the -10 to +10V range |
Pin 5 | Wake-Up pin to wake logger from sleep mode (for use see Appendix 1) |
Pin 6 | CAN Bus 1 (Medium Speed Bus) Low Signal |
Pin 7 | CAN Bus 0 (High Speed Bus) Low Signal |
Pin 8 | K-Line (1 wire bus) of ISO 9141 |
Pin 9 | 4.5-36V Supply Voltage |
Pin 10 | +4.5V Instrumentation Supply Voltage, ensure that current draw is not more than 100mA |
Pin 11 | Digital Input or Output 2 - When used as an input do not apply voltages outside of the 0 to +12V range, when used as an Output ensure that current draw is not more than 100mA. More information on use ofthis pin can be found in Appendix 2 and 3 |
Pin 12 | Digital Input or Output 0 - When used as an input do not apply voltages outside of the 0 to +12V range, when used as an Output ensure that current draw is not more than 100mA. More information on use ofthis pin can be found in Appendix 2 and 3 |
Pin 13 | CAN/CAN FD Bus 2 (Instrumentation Bus) Low Signal |
Pin 14 | Analog Input 2 - do not apply voltages outside of the -10 to +10V range |
Pin 15 | LIN 0 |
Pin 16 | CAN/CAN FD 3 H |
Pin 17 | Analog Input 0 - do not apply voltages outside of the -10 to +10V range |
Pin 18 | Analog Ground |
Pin 19 | CAN Bus 1 (Medium Speed Bus) High Signal |
Pin 20 | CAN Bus 0 (High Speed Bus) High Signal |
Pin 21 | Ground |
Pin 22 | Power Ground |
Pin 23 | Digital Input or Output 3 (can also be used as a switched power supply +Vd) |
Pin 24 | Digital Input or Output 1 - When used as an input do not apply voltages outside of the 0 to +12V range, when used as an Output ensure that current draw is not more than 100mA. More information on use ofthis pin can be found in Appendix 2 and 3 |
Pin 25 | CAN/CAN FD Bus 2 (Instrumentation Bus) High Signal |
Last updated
