Loading Linux Image onto ReXgen OEM

• Download the image from the link below

​https://itltdgithub.s3.ap-south-1.amazonaws.com/Images/uuu-deploy-general-v2-08052025.7z ​

• Extract it into your PC.

• Open the command prompt in this location.

• Then run the following command

uuu deploy-image-wic.uuu

• Make sure that the device is off first.

• Remove the cover.

• Now, connect the 5-pin USB header to the mini ISP connector.

• The Reb pin of the header should align with the dot.

• Now connect the other end to the PC.

• Then, turn on the device.

• The flashing should start now, and you should see progress in the CMD window opened earlier.

• Once flashing is completed.

• Switch off the device and remove the USB cable from the board.