LogoLogo
Home
  • 🏠Home
  • StreamLog User Documentation
    • Quick Start Guide
      • DiaLog Configuration
        • Accessing StreamLog
      • Software Introduction
        • Toolbar
        • Filter Panel
        • Projects Panel
        • Editors Tabs
      • StreamLog Set Up
        • StreamLog Settings
          • Assigning Engineers, Vehicles and Loggers
        • Fleet Parameters
      • Rebel Set Up
        • GPRS settings
        • WiFi Settings
      • StreamLog Operation
        • Editors Tabs
          • Sessions Tab
          • Loggers Tab
          • Vehicles Tab
          • Events Tab
          • Engineers Tab
          • Live View Tab
          • Fleet Overview Tab
          • Fleet Reports Tab
        • Data Extraction from StreamLog
          • Extracting streamed data
          • Requesting IVD data from Logger
        • Updating a Configuration of an assigned Rebel
        • Reports
      • Appendix
        • User Administration
        • User Workflow
    • StreamLog Initialisation- User Guide
    • SIM Card Installation Guide
    • StreamLog Assistant
      • DiaLog Configuration
        • Checking communication between DiaLog and the StreamLog Server
      • Rebel Set-Up
        • GPRS settings
        • Checking communication between the Rebel (GPRS) and the StreamLog Server
        • WiFi Settings
        • Checking communication between the Rebel (WiFi) and the StreamLog Server
Powered by GitBook
On this page
Export as PDF
  1. StreamLog User Documentation
  2. Quick Start Guide
  3. Appendix

User Workflow

This section summarises the workflow for StreamLog, identifying the user performing the different stages discussed in this document.

  1. The Administrator creates/adds all engineers, loggers and vehicles in StreamLog.

  2. The project Leader creates a project representing all work performed with a single ECU.

  3. The Project Leader assigns engineers, loggers and vehicles the Administrator adds to the Project.

  4. The engineer set up the project's vehicle structures for the required tasks.

  5. The engineer assigns loggers to each structure from the loggers assigned by the Project Leader.

  6. The engineer assigns vehicles to loggers from the vehicles assigned by the Project Leader.

StreamLog is then ready to begin collating data from the Rebels.

Important—Should an Engineer require any adjustments to a vehicle structure and thus the data being captured, the current structure should be revised rather than a new structure uploaded.

PreviousUser AdministrationNextStreamLog Initialisation- User Guide

Last updated 1 year ago