LogoLogo
Home
  • 🏠Home
  • StreamLog User Documentation
    • Quick Start Guide
      • DiaLog Configuration
        • Accessing StreamLog
      • Software Introduction
        • Toolbar
        • Filter Panel
        • Projects Panel
        • Editors Tabs
      • StreamLog Set Up
        • StreamLog Settings
          • Assigning Engineers, Vehicles and Loggers
        • Fleet Parameters
      • Rebel Set Up
        • GPRS settings
        • WiFi Settings
      • StreamLog Operation
        • Editors Tabs
          • Sessions Tab
          • Loggers Tab
          • Vehicles Tab
          • Events Tab
          • Engineers Tab
          • Live View Tab
          • Fleet Overview Tab
          • Fleet Reports Tab
        • Data Extraction from StreamLog
          • Extracting streamed data
          • Requesting IVD data from Logger
        • Updating a Configuration of an assigned Rebel
        • Reports
      • Appendix
        • User Administration
        • User Workflow
    • StreamLog Initialisation- User Guide
    • SIM Card Installation Guide
    • StreamLog Assistant
      • DiaLog Configuration
        • Checking communication between DiaLog and the StreamLog Server
      • Rebel Set-Up
        • GPRS settings
        • Checking communication between the Rebel (GPRS) and the StreamLog Server
        • WiFi Settings
        • Checking communication between the Rebel (WiFi) and the StreamLog Server
Powered by GitBook
On this page
Export as PDF

Last updated 1 year ago

The Inserting a SIM Card into a Rebel Logger

If equipped with the GPRS option, you can insert a standard-size SIM card into the Logger to facilitate using it with StreamLog; although the exact position of the SIM card varies between different Loggers in principle, the method of installing the SIM Card is the same:

Undo the TORX bolts (normally at the end opposite the USB and SD Card of the Logger).

Locate the SIM Card Slot.

Insert the Standard Size SIM Card into the slot and push it in, making sure that the contacts of the SIM Card face the PCB that the slot is soldered onto and making sure that the cut-off corner of the SIM Card goes in first.

Place the end panel and tighten the TORX bolts again, taking great care not to over-tighten the bolts and strip the tread in the housing.

  1. StreamLog User Documentation

SIM Card Installation Guide

PreviousStreamLog Initialisation- User GuideNextStreamLog Assistant