Pinout of the Multi Connect Cable
The Standard Display Cable may be connected to the multi-connect cable's AUX cable to connect it to the Rebel CT or LT Loggers. The pinout is as follows:
AUX (The port of the Multi Connect Cable that is typically used with the Rebel Dash)
CAN+PWR (This Connector is used to power the Logger; e.g. it could be powered via the diagnostics connector of a vehicle connected to the OBD2 to DB9 Cable.)
Digital/Analog (This Connector connects Digital and Analog signals to the Logger.)
LAN/CAN (Used for connecting CAN2 and Ethernet to the Logger.)
OBD&INST (The multi-connect cable attaches to the Logger via this connector.)
Last updated
