LogoLogo
Home
  • 🏠Home
  • Rebel Dash
    • Rebel Dash: Product Manual
      • Connecting the Rebel Dash to a CT or LT Logger
      • Technical Specifications
      • The Rebel Dash Software
        • Installing the Rebel Dash Config Software
        • Configuring the Rebel Dash using the Rebel Dash Software
          • Creating a Configuration Ready to send to the Rebel Dash
          • Installing the Kvaser Drivers
          • Sending the Configuration via the CAN bus through a Kvaser Device
          • Sending the Configuration via USB stick
        • Updating the Firmware in the Rebel Dash
      • Configuring the Rebel Dash using DiaLog
      • Using the Rebel Dash to Display the Signals
        • Config Menu
          • CAN Viewer
        • Changing between Signals
        • Changing the Display Mode
      • Pinout Details: Rebel Dash
        • Pinout of the Rebel Dash Cable
        • Pinout of the OBD2 to DB9 Cable
        • Pinout of the Multi Connect Cable
Powered by GitBook
On this page
Export as PDF
  1. Rebel Dash
  2. Rebel Dash: Product Manual
  3. The Rebel Dash Software

Configuring the Rebel Dash using the Rebel Dash Software

PreviousInstalling the Rebel Dash Config SoftwareNextCreating a Configuration Ready to send to the Rebel Dash

Last updated 1 year ago

The Rebel Dash software makes it easy for the user to configure the Rebel Dash device. Follow the simple steps below, and the device will be ready to collect the data. This is used when configuring the Dash to display data from a vehicle's CAN Bus or the K-Box instrumentation (or both). It could also be used to display data from any device that broadcasts simple CAN Messages on a CAN bus, e.g. sensors.

Creating a Configuration Ready to send to the Rebel Dash

Installing the Kvaser Drivers

Sending the Configuration via the CAN bus through a Kvaser Device

Sending the Configuration via USB Stick

How to configure Rebel Dash using .

rebel dash software