Config Menu

The Config Menu of the Rebel Dash device, which allows the user to change the device's settings, is accessed by holding the View Key for 1 second.

To Navigate to Options, press the '^' and 'v' arrow buttons until the desired setting is highlighted.

To toggle the option, press the '<' and '>' arrow buttons until the preferred option is highlighted.

To configure the selected option, press the 'Mode' and 'Select' buttons to represent the "left" and "right" functions to adjust it.

To select the transmission speed of the CAN bus signal on the device.

To set the time for the device to go into sleep mode when no CAN message is received.

Configure the device to produce a sound from the buzzer whenever a button is pressed.

To change the brightness of the LCD backlight by percentage.

To change the brightness on the keypad backlight by percentage.

To view the CAN messages received on the device.

Last updated 7 months ago