Logger Menu

• Refresh Device Structure— Loads the active configuration resident in the logger.

• Send Configuration to the Logger— Sends the selected configuration to the logger and activates it.

• Start— Start the Logger if logging has been stopped.

• Stop— Stops the Logger if it is recording.

• Set Time— allows the real-time clock to be set in the logger.

• Clear Configuration— Clears the current configuration in the logger.

• Format SD— Formats the SD card in the logger and deletes all files.

• Settings— Find information about the Hardware and set Wi-Fi and GPRS settings.

• Reflash— Update Logger firmware and get diagnostics information.