LogoLogo
Home
  • DiaLog Software
  • DiaLog Software Manual
    • Introduction
      • Overview
      • Licence Agreement
      • Limitation of Liability
      • System Requirements
      • Software Versions
    • Getting Started
      • Software Installation
      • Software Introduction
        • Database Panel
        • Navigation Bar
          • Configuration Menu
          • Advanced Configuration Menu
          • Project Menu
          • Import Menu
          • Export Menu
          • Presets Menu
          • Logger Menu
          • Analysis Menu
          • StreamLog Menu
          • Settings Menu
        • Import Tabs
        • Main Panel
        • Message Panel
      • GPRS Settings
      • Wi-Fi Settings
      • Steps to Enable FIFO
      • How to obtain the diagnostic log before contacting support
  • Quick Start Guide
    • Set the Date and Time of the Rebel Data Logger.
    • Format the SD card of the Rebel Data Logger.
    • Reflash firmware of Rebel Data Logger.
    • View Live data using DaiLog
    • Manage projects in Dialog software
      • Create a new project
      • Export a project
      • Delete a project
      • Import a project
    • Create and manage a Configuration in Dialog Software
    • Configure Rebel data logger to record raw CAN messages
      • Record Raw CAN Bus data
      • Reconfigure the Rebel data logger
      • View Raw CAN data
    • Configuring Rebel Data Logger with DBC file
      • Log CAN signals using a DBC file
      • Reconfigure the rebel data logger.
    • Log data using an A2L file
      • Log data using an A2L file
      • Reconfigure the rebel data logger
    • Configuring Rebel Data Logger to record GNSS data
      • Creating a Configuration to Record GNSS data
      • Reconfigure the rebel data logger
    • Configure Analogue and Digital Inputs using DiaLog
      • Configure Analogue and Digital inputs in Dialog software using the rebel data logger
      • Reconfigure the rebel data logger
    • Using Digital Switch to Start Logging in a Rebel Logger
    • Exporting an IVD file
      • Extract an IVD file using the DiaLog software
      • Export an IVD file
    • Interpolate or resample while exporting data
    • Import DBC signals to multiple log data using Batch Processing
    • Merge multiple log data from existing IVD files
      • Method 1
      • Method 2
      • Method 3
    • Export CAN trace, EOBD, Statistical report and DTC data using BP
    • Extracting data around specific triggers using Batch Processing
    • Various methods for exporting CAN trace
      • Export Raw CAN trace from IVD files
      • Export CAN trace log by adding DBC signals
    • Configuring Rebel Dash in Dialog Software
      • Steps to Reconfigure the Rebel data logger and Rebel Dash
    • Export data from Dialog's Configurator version
    • Configure SD card/Rebel data logger using Dialog remote
      • Formatting the Sd card and sending the configuration to it
      • Using tabs in Dialog Remote
        • Set Rebel time
        • Settings
        • Reflash Rebel
    • Log data using UDS in DiaLog Software
    • Create a shell script for converting files
    • Deactivating and Moving the License of Dialog software
      • Deactivate the DiaLog license
      • Move a DiaLog license from one PC to another
  • Appendix 1
    • Reflash
    • Edit PID Presets
    • License Manager
    • General Option of Navigation bar, Settings Menu
    • Data Option of the Navigation bar, Settings Menu
    • Protocol Priorities
  • Appendix 2
    • Glossary
    • CAN Modes
    • CAN Definitions
    • Standard OBD Periodic Identifiers
  • Appendix 3
Powered by GitBook
On this page
  1. Quick Start Guide

Export CAN trace, EOBD, Statistical report and DTC data using BP

PreviousMethod 3NextExtracting data around specific triggers using Batch Processing

Last updated 1 year ago

In the Analysis window, identify and click on the file that contains all the data required.

Click on Batch Processing to display the Export data window.

  1. In the 'Input files' tab

  • Click on the ‘Add file(s) for conversion’ icon.

  • Select the desired IVD file.

  • Click 'Open'.

This adds DBC to the Input files window

  1. In the 'General' tab

  • Enable 'Convert files' and enable 'Convert each input file to a separate output file.'

  • Select the desired format for conversion, e.g., CSV.

  • Enable the check box before DTC report, Statistical report, EOBD data and Can Trace data.

  • Select the format for saving the output files.

Note:

  • Binary logging or BLF format allows the user to include digital and analogue inputs (if any).

Click 'Browse' and specify the location to store the output file(s) (select 'Make New Folder' to save the file(s) in a completely 'new folder') and then click 'OK'.

Click 'Process' to continue.

Click 'Close'.

Once the processing is complete, the below message window is displayed. Click 'OK' to complete the process and exit the window.

At the end of the process, all the files have to be separately stored at the specified location in the defined format (csv).