Using Digital Switch to Start Logging in a Rebel Logger

Right-click Digital 0 (The Digital Switch is connected to Digital Input 0).

Select Add Item to Trigger.

Create a start condition with Parameter 3 as <.

So, in this case, the condition is true when the Digital In 0 changes from 1 to 0.

Create New Trigger

  • Provide a name for the trigger.

  • Select the action as Start.

  • Options as Continuous.

  • Select the condition which was made in Step 3.

  • Provide a debounce of a few milliseconds so that it won’t consider sudden changes in the switch that happen rapidly due to any issue with the switch.

With the above settings, the logger will start logging when the switch is pressed.

Notes:

  • Other actions, sample methods, options, and pre-log time are available.

  • Ensure the trigger functionality is appropriately checked before sending the vehicle for trial.

  • You can connect a Push-Button switch between PIN 9 and PIN 11 of the Multiconnect Cables Dig & Analog connector.

Last updated