LogoLogo
Home
  • 🏠Home
  • 💽ReXdesk: Configuration Software
  • ReXdesk : ReXgen Series Configuration Software
    • ReXdesk Manual
      • Getting Started
        • Pinout Details: ReXgen1
        • Pinout Details: ReXgen 2
        • Pinout details: ReXgen Air
        • Pinout Details: ReXgen Pro
        • Software Installation
        • Driver Installation
        • Activate ReXdesk License
      • Software Introduction
        • Graphical Overview
        • Navigation Bar
          • File Menu
          • Project Menu
          • Config Menu
          • Device Menu
          • Tool Menu
            • Encryption Manager
            • Cloud Settings
              • Mobile Settings
              • Wi-Fi Settings
              • *FTP Settings
              • AWS Settings
            • Settings
        • Status Bar
        • Projects Panel
        • Configuration Panel
          • CAN Bus Options
          • LIN Bus Options
          • Channel Options
          • Transmitting
            • Periodic CAN/CAN FD Transmission
            • HW Info Tool
            • Snapshot Tool
          • Filter
          • Device Configuration
            • Storage
            • Encrypting Data Log and Device
            • Enabling FTP Upload
            • ReXgen Sleep/Wake up function Implementation
            • AWS
            • Live data window
        • Library window
        • Trigger window
          • New trigger panel
        • Internal storage Window
        • Show data log window
          • Export Configurator Window
        • Export settings window
        • TCP/IP
          • Configuring Wi-Fi settings to Start up a Pro Device.
      • Quick Start Guide
        • Preparation of Configuration
          • CAN Log All Configuration
          • Logging Using Filters
          • Logging Using J1939 Filters
          • Using the UDS function
          • Logging Analog Channels
          • Logging Digital Channels
          • Logging Accelerometer data
          • Logging Gyroscope data
          • Logging GNSS data
        • Advanced Configuration
          • Setup Cloud Settings
            • Mobile Settings
            • Wi-Fi Settings
            • FTP Settings
              • Steps to add new FTP settings using ReXdesk
              • Steps to enable FTP configuration in the ReXgen logger.
            • AWS Settings
              • Steps to add new AWS settings using ReXdesk
              • Steps to enable AWS configuration in the ReXgen logger
          • Upload configuration to the logger via FTP
          • Upload configuration to the logger via AWS S3 bucket
          • Trigger-Based Logging
          • Periodic CAN/CAN FD Transmission
          • HW Info Tool
          • Snapshot Tool
        • Retrieving Raw Data Log
        • One-Click Export after Linking DBC to CAN/CAN FD Bus
        • Exporting Data using CAN/CAN FD DBC File
        • Viewing Live Data
        • Log OBD2 Mode 1
      • Appendix 1 - CAN ERROR Definitions
      • Appendix 2 – Digital Input Functions
      • Appendix 3 – GNSS Orientation Guide
        • GNSS Positioning
        • Dead Reckoning
          • IMU Orientation in ReXgen Air devices
          • IMU Orientation in ReXgen Pro devices
        • Geofencing
      • Appendix 4 – Using the LTE Debug Tool
      • Appendix 5 – Setting up a digital trigger in ReXgen
      • Appendix 6 – ReXdesk CLI Manual
        • Convert-file
        • Convert-folder
        • Configure
        • Reflash
        • Format
    • ReXdesk CLI Guide
      • Convert-file
      • Convert-folder
      • Configure
      • Reflash
      • Format
    • ReXdesk Convert Guide
      • Convert-file
      • Convert-folder
      • Configure
      • Reflash
      • Format
Powered by GitBook
On this page
Export as PDF
  1. ReXdesk : ReXgen Series Configuration Software
  2. ReXdesk Manual
  3. Getting Started

Software Installation

PreviousPinout Details: ReXgen ProNextDriver Installation

Last updated 1 year ago

Before proceeding with the installation, please ensure that you have acquired administrative privileges.

Make sure you have installed the Microsoft Visual C++ Redistributable (x86) and,

Dotnet runtime 4.7.2 is required

You can download it from the following link:

To begin the installation of the ReXdesk software, open the installer by running the set-up file.

Click ‘Next’ to start the installation.

To continue installing ReXdesk on your system, click ‘Next’.

To cancel the installation at this stage, click ‘Cancel’ (No software will have been installed on the system yet).

Select the folder in which you wish to install the software. It’s preferred to use the default location.

Select the preference for computer user installation to determine which computer users will access the ReXdesk software.

Click ‘Next’ to continue with the installation.

To continue installing ReXdesk on your system, click ‘Next’.

Once the installation is complete, this window will appear.

Click ‘Close’ to close the window. ReXdesk is now successfully installed on your system.

Download .NET Framework 4.7.2 Offline InstallerMicrosoft
Logo