HW Info Tool

The user application can transmit a CAN Message to ReXgen to trigger the following responses:

1) Current Firmware version of the ReXgen.

2) ReXgen should confirm that it is configured, has a configuration version, and has an active configuration.

3) Send the serial number of the ReXgen.

4) Send the RTC Date & time.

Format of the Transmitted message:

Function	Request ID	Transmit ID	0	1	2	3	4
Firmware	RX Ident	Tx Ident	FW_MAJOR_VERSION	FW_MAJOR_VERSION	FW_MINOR_VERSION	FW_BRANCH	FW_TYPE
Configuration ID	RX Ident +1	Tx Ident +1	Configuration Version Number	Configuration Version Number	Configuration Version Number	Configuration Version Number
Manufacturing INFO	RX Ident +2	Tx Ident +2	Product	Assembly	Batch	Batch	SERIAL_NUMBER
RTC Time	RX Ident +3	Tx Ident +3	UNIX Date/Time	UNIX Date/Time	UNIX Date/Time	UNIX Date/Time

FW_TYPE 0-Release, 1-alpha, 2-beta, 3-pre release

FW_BRANCH 0 -Main branch

Allows to drag and drop the same into the configuration. The tool has the following settings:

• Output CAN

  • Users can choose CAN 0 or CAN 1

• Rx Ident: Start range CAN ID of messages transmitted from an external tool.

• Tx Ident: Start range CAN ID of messages transmitted from ReXgen.

Example:

If Rx Ident is 7E0 and TX Ident is 7E8 in the configuration, the Identifiers will be as shown below:

Rx Ident	Tx Ident	HW Info
7E0	7E8	Firmware
7E1	7E9	Configuration ID
7E2	7EA	Manufacturing Info
7E3	7EB	RTC Time (UNIX Date/Time)