Upload configuration to the logger via AWS

This step-by-step guide explains uploading a new configuration to the AWS S3 bucket by placing the .rxc file in the logger root folder..

Step 1

Note:

• Before you begin the steps, ensure your logger is connected to the server with an existing configuration.

• Make the new configuration.

• Enable AWS from the Device Configuration menu.

Note:

• Set your configuration check time in the given section while enabling AWS.

Step 2

• Save the Project with the name you require for the configuration.

• Under the ‘Config’ tab, select Export from the drop-down menu.

• Select ‘Export ReXgen Configuration (rxc)’ from the listed options.

Step 3

• Save the file with the desired name.

• Click ‘Save’.

• Once saved, rename the file as ‘config.rxc.’

Note:

• Ensure that you rename the file as 'config.rxc' only.

• If the xml is custom-made, ensure to change the guid of the xml file whenever it is sent through the server.

Step 4

• Add to your config folder in your S3 bucket by adding it to the root folder of the logger.

Note:

• Once the USB is removed, only then the logger will connect to the server and upload files.