Calibration
Last updated
Last updated
You can calibrate the K-TCxx to Improve the Accuracy of the measurements. The software allows you to cycle through a number of measurement points; once done, the calibration will apply the calibration to the K-TCxx, and measurement accuracy will be improved.
Pressing the Load Button Loads the calibration in the K-TCxx and displays it on the screen.
You may use this function if you wish to check that the K-TCxx is calibrated.
Pressing the 'Notes' button will open the release notes containing all the details about the software's development.
Nominal Value
Allows the user to select the value being fed to the thermocouple channel.
Raw Temperature
Displays the RAW temperature data.
Noise
Displays the noise level in the signal.
Settings
Allows the user to set the Nominal temperature values.
Noise Level
Allows the user to set the tolerance level.
Clear Calibration
Clears the existing calibration in the device.
Clear Channel
Clears the calibration for the particular channel.
Alternatively, press the start button and attach the appropriate thermocouple test signals to the inputs of the K-TCxx to cycle through the test points to calibrate the K-TCxx for maximum accuracy.