Getting Started
Last updated
Last updated
The K-TC is Influx’s stackable instrumentation that is compatible with the entire range of data loggers from Influx. It can also be integrated with any device configured via DBC files, even other logger systems or output signals on CAN to the Rebel Dash display.
The K-TC is an ideal solution for applications that require a large number of thermocouple inputs. The K-TC’s accurate sensor data is transmitted periodically on the CAN bus, enabling multiple devices to be connected. In addition, The temperature data is simultaneously logged in the inbuilt micro SD card, the K-TC CAN bus settings, calibration and sampling rates are all easily configurable, and these settings are stored within the K-TC even when the device is not powered.
Power supply
4.5V to 36V DC
Power consumption
Normal operation 150mA to 350mA at 12V
Power down standby mode approx. 3mA at 12V
Configuration
via CAN bus with K-Cal for calibration. via USB with TC Logger SW for logging.
Output control settings and configurations stored in the device
Interfaces
CAN bus (max 1000 kbps), USB 2.0
PC Interfaces
Power by USB2.0 Type B (isolated)
Enclosure
Dimension (LxHxW): 115x26(K-TC8), 46(K-TC16), 86(K-TC32) x 105mm
Weight 450g(K-TC8), 570g(K-TC16), 900g(K-TC32)
IP65
ABS
Environmental
-40°C to +85°C
Humidity max 90%
Thermocouple Inputs
K, J, T-type
Accuracy ± 1°C
Measurement: -200 °C to 1250 °C
Connection type
Thermocouples: mini K, J ,T-Type
Thermocouple Inputs
Number of channels
8 K, J, T-type inputs (K-TC8), 16 K, J, T-type inputs(K-TC16), 32 K, J ,T-type inputs (K-TC32)
Measurement Range
-200°C to +1200°C
Max Sampling Rate
20 Hz per channel
Max applied voltage
± 3.3 V