Connecting and powering the K-TCxx

However, K-TCxx is powered via the CAN and power connectors and designed with CiA® 102 pinout for the CAN bus and power to connect the device as simple as possible.

Most commonly, it will be powered from a Rebel Logger using the Multi Connect Cable, but you can also power it via pin 9 (4.5 to 36V) and pin 5 PowerGND of the 9-pin Sub D connectors. If connected via the Multi connect cable, the CAN 1 (MS) bus is also connected to allow the Logger to record the data transmitted from the K-TCxx.

Warning:

• Several K-TCxx can be daisy chained via the additional DB9 Connector. However, they must have power supplied separately via power breakout in the cable, not via the Logger. It can also be used to connect other devices, such as the Rebel Dash.

The pinout of the required Cable between the two K-TCxx is as follows: