Reprogramming the K-TCxx
Last updated
Last updated
You can change to the Reprogramming Function by clicking the Tab; you will see the following Window.
Click the Open Button
Locate the hex file that you wish to program into the K-TC 2.0xx. Usually, this will be located in C:\Program Files (x86)\Influx Technology\K-TC 2.0xx Config\firmware.
Then select the 'Open' option.
Click the Commit button; you will see the following progress indicator at the bottom of the screen:
When the progress indicator reaches the right-hand side, reprogramming is complete.
OR
