Making a Configuration in Dialog to Log K-Box

Create a new Configuration.

Enable AUX Power ON in the settings tab. Click OK.

Create a new BUS.

Select CAN 1 (MS) from the pop-up menu.

Enter the BUS properties.

Create a New Protocol.

Select the CAN Monitor protocol.

Assign the settings and Protocol Name.

Select the Import tab and click Load DBC.

Or

Click the DBC tab on the right side.

Click the open DBC file icon to browse and select the previously generated K-Box DBC.

Select the required signal from the DBC window.

Copy the selected signals and paste them into the DAQ list.

Send the configuration to the logger.

Notes:

• You can have multiple buses in a single configuration. You can log OBD, A2L or ODX data along with K-Box.