Calibration
You can calibrate the K-TCxx to Improve the Accuracy of the measurements. The software allows you to cycle through a number of measurement points; once done, the calibration will apply the calibration to the K-TCxx, and measurement accuracy will be improved.
Pressing the Load Button Loads the calibration in the K-TCxx and displays them on the screen. You may use this function if you wish to check that the K-TCxx is calibrated | |
Nominal Value | Allows the user to select the value being fed to the thermocouple channel. |
Raw Temperature | Displays the RAW temperature data. |
Noise | Displays the noise level in the signal. |
Settings | Allows the user to set the Nominal temperature values. |
Noise Level | Allows the user to set the tolerance level. |
Clear Calibration | Clears the existing calibration in the device. |
Clear Channel | Clears the calibration for the particular channel. |
Alternatively, press the start button and attach the appropriate thermocouple test signals to the inputs of the K-TCxx to cycle through the test points to calibrate the K-TCxx for maximum accuracy.
Last updated