LogoLogo
Home
  • 🏠Home
  • K-Series: Product Manual
    • K-Box: Product Manual
      • Connecting and powering the K-Box
        • Enable the AUX Power setting within the Logger Configuration
      • Configuring the K-Box
        • Installing the Kvaser Drivers
        • Installing ReXgen J2534 Drivers
        • Installing the Rebel Drivers
        • Installing the K-Cal Software
        • Using the K-Cal Software
          • Configuring the Analog Channels
          • Configuring the Digital Channels
            • The Input Function
            • Pulse Duration Measurement
            • Frequency Measurement
            • High-Frequency measurement
            • Cycle Duration Measurement
            • Duty Cycle/PWM Measurement
            • Event Measurement
            • RPM Measurement
            • The Output Function
          • Reprogramming the K-Box
          • Calibrating the K-Box
          • Erasing the Calibration
      • Using K-Box Cal to display data
        • Channel Display and Conversion
          • Selecting the Channel to display
          • Creating a Conversion Table
          • Applying a Conversion Table to a Channel
          • Applying a Formula to a Channel
        • Using the Oscilloscope to display data
          • Individually Adding items to the Oscilloscope.
          • Adding All Channels to the Oscilloscope (Method 1)
          • Adding All Channels to the Oscilloscope (Method 2)
          • Working with items added to the Oscilloscope
        • Using the Oscilloscope
        • Exporting a DBC file with conversion tables and Formulas
      • Making a Configuration in Dialog to Log K-Box
      • Appendix
        • Specifications
        • Pinout of the K Box
        • Pinout of the Multi Connect Cable
        • Measurement IEPE procedure
    • K-TC: User Quick Start Guide
      • Getting Started
        • Pinout details
        • Software Installation
        • Driver Installation
      • Software Introduction
        • Graphical Overview
        • Navigation Bar
        • Status Bar
        • Configuration Panel
        • Max Log Time (min)
        • Internal Storage Window
        • Show Data Log Window
      • The 'How to' Guide
        • Preparation of configuration
        • Setting up Max log time
        • Retrieving the Datalog
    • K-TC: Logger Manual
      • Introduction
        • Technical Specifications
        • Pinout of the K-TCxx
        • Software Installation
          • Installing the K-TCxx Cal Software
          • K-TCxx Driver installation
          • Installing the Rebel Drivers
      • Connecting and powering the K-TCxx
        • Enable the AUX Power setting within the Logger Configuration
      • Software Introduction
        • Interface Tab
          • General Tab
          • Measurement Tab
          • Thermo Couples Tab
          • Calibration
          • Reprogramming
          • Manufacturer
      • Using the K-TCxx Cal Software
        • Reprogramming the K-TCxx
        • Calibrating the K-TCxx
        • Erasing the Calibration
        • Configuring the K-TCxx
        • Using K-TCxx Cal to display data
        • Channel Display
        • Selecting the Channel to display
      • Using the Oscilloscope to display data
        • Individually Adding items to the Oscilloscope.
        • Adding All Channels to the Oscilloscope (Method 1)
        • Adding All Channels to the Oscilloscope (Method 2)
        • Working with items added to the Oscilloscope
        • Using the Oscilloscope
      • Exporting a DBC file
      • Loading the K-TCxx configuration into DiaLog
      • Appendix
    • K-TC 2.0: User Quick Start Guide (using K-Log)
      • Getting Started
        • Pinout details
        • Software Installation
        • Driver Installation
      • Software Introduction
        • Graphical Overview
        • Navigation Bar
        • Status Bar
        • Configuration Panel
        • Max Log Time (min)
        • Internal Storage Window
        • Show Data Log Window
      • The 'How to' - Guide
        • Preparation of configuration
        • Setting up Max log time
        • Retrieving the Datalog
    • K-TC 2.0 : Logger Manual (using K-CAL)
      • Introduction
        • Technical Specifications
        • Pinout of the K-TCxx
        • Software Installation
          • Installing the K-TCxx Cal Software
          • K-TCxx Driver installation
          • Installing ReXgen J2534 Drivers
          • Installing the Rebel Drivers
      • Connecting and powering the K-TCxx
        • Enable the AUX Power setting within the Logger Configuration
      • Software Introduction
        • Interface Tab
          • General Tab
          • Measurement Tab
          • Thermo Couples Tab
          • Calibration
          • Reprogramming
          • Manufacturer
      • Using the K-TCxx Cal Software
        • Reprogramming the K-TCxx
        • Calibrating the K-TCxx
        • Erasing the Calibration
        • Configuring the K-TCxx
        • Using K-TCxx Cal to display data
        • Channel Display
        • Selecting the Channel to display
      • Using the Oscilloscope to display data
        • Individually Adding items to the Oscilloscope.
        • Adding All Channels to the Oscilloscope (Method 1)
        • Adding All Channels to the Oscilloscope (Method 2)
        • Working with items added to the Oscilloscope
        • Using the Oscilloscope
      • Exporting a DBC file
      • Loading the K-TCxx configuration into DiaLog
      • Appendix
  • Pinouts for K-Series devices
    • K Box Pinouts (INF 2201)
    • KTC-XX Pinouts (INF 2204.02/5.02/6.02)
    • K AN8 Pinouts (INF 2210)
    • K IEPE Pinouts (Add-On) (INF 2213)
    • K PT Pinouts (Add-On) (INF 2212)
    • Appendix
      • The Wake Up Pin
      • Digital Input function
      • Digital Output function
Powered by GitBook
On this page
Export as PDF
  1. K-Series: Product Manual
  2. K-TC 2.0: User Quick Start Guide (using K-Log)
  3. Getting Started

Software Installation

PreviousPinout detailsNextDriver Installation

Last updated 11 months ago

Before proceeding with the installation, please ensure you have acquired administrative privileges.

Make sure you have installed the Microsoft Visual C++ Redistributable (x86)

Dotnet runtime 4.7.2 is required.

You can download it from the following link:

To begin with, install the K-Log software and open the installer by running the set-up file.

  • Click ' Next ' to continue installing the K-Log on your system.

  • To cancel the installation at this stage, click 'Cancel'. (No software will have been installed on the system now.)

  • Select the folder where you wish to install the software; using the default location is preferred.

  • Select the preference for computer user installation to determine which computer users will access the ReXdesk software.

  • Click 'Next' to continue with the installation.

  • Click 'Next' to confirm the installation.

  • Once the installation is complete, this window will appear.

  • Click 'Close' to close the window. K-Log has been successfully installed on your system.

https://aka.ms/vs/17/release/vc_redist.x86.exe
https://dotnet.microsoft.com/en-us/download/dotnet-framework/thank-you/net472-offline-installer