LogoLogo
Home
  • 🏠Home
  • ReXgen Series
  • Standard Operating Procedure - ReXgen
  • Pinout Details: ReXgen 1
  • Pinout Details: ReXgen 2/IMU
  • Pinout Details: ReXgen Air
  • ReXgen 1
    • Start-up Guide: ReXgen 1
    • ReXgen 1- Product Manual
      • Overview of the Device
        • Product Dimensions and Elements
        • Technical Specifications
        • Electrical Data
        • Intended Use
        • Liability & Warranty
        • Device Kit
        • Service & Support
      • Hardware, Functions, and Accessories
        • Hardware
          • Enclosure
          • Pinout
        • Functions
          • Recording CAN Data
          • Functioning as a PASS-THRU device using J2534:
        • Accessories
      • Getting Started
        • Connecting the Device
        • Software Installation
        • Driver Installation
        • ReXgen1 as a J2534 tool
        • Firmware Update
      • Annexures
  • ReXgen 2/IMU Product Manual
    • Start-up Guide: ReXgen 2/IMU
    • ReXgen 2/IMU- Product Manual
      • Overview of the Device
        • Product Dimensions and Elements
        • Technical Specifications
        • Electrical Data
        • Intended Use
        • Liability & Warranty
        • Conformity
        • Device Kit
        • Service & Support
      • Hardware & Functionality
        • Hardware
          • Enclosure & Cables
          • PinOut Details
          • GNSS Antenna Connector
          • Indicator Elements – LED'S
          • Accessories
        • Functionality
          • Recording CAN/CAN FD Data
          • Recording LIN Data
          • Recording GNSS Data
          • Recording Accelerometer & Gyroscope Data
          • Digital & Analog Input Functions
          • Functioning as a PASS-THRU device using J2534:
      • Getting Started
        • Software Installation
        • Driver Installation
        • ReXgen2 as a J2534 tool
        • Firmware Update
      • Annexures
        • Digital Input Functions
        • Certifications
          • FCC
          • CE
          • ROHS
        • CAN Overview
  • REXGEN AIR PRODUCT MANUAL
    • Start-up Guide: ReXgen Air
    • ReXgen AIR- Product Manual
      • Overview of the Device
        • Product Dimensions and Elements
        • Technical Specifications
        • Electrical Data
        • Intended Use
        • Liability & Warranty
        • Device Kit
        • Service & Support
      • Hardware & Functionality
        • Hardware
          • Enclosure
          • ReXgen Air: PinOut Details
          • GNSS Antenna Connector
          • Indicator Elements – LEDS
          • Accessories
        • Functionality
          • Recording CAN Data
          • Recording LIN Data
          • Recording GNSS Data
            • GNSS Positioning
            • Dead Reckoning
              • IMU Orientation
            • Geofencing
          • Recording Accelerometer & Gyroscope Data
          • Digital & Analog Input Functions
      • Getting Started
        • Software Installation
        • Driver Installation
        • Firmware Update
      • Annexures
        • Digital Input Function
        • The Wake-Up Pin
        • CAN Overview
  • ReXgen Series Usage Guides
    • ReXgen as Pass-Thru
      • The applications which support J2534 should show installed devices.
        • Module Analyser
        • K-Cal
      • SavvyCAN
    • SavvyCAN with ReXgen
      • Adding DBC File to SavvyCAN and viewing live data
      • Sending custom CAN messages
    • Log OBD2 Mode 1 with ReXgen
  • ReXgen Air - Cloud usage guides
    • Cloud Usage Guides For ReXgen Air Device
      • Quick Start Guide For AWS S3- ReXgen Air
        • AWS Bucket Creation
        • How to Create an Access key and secret key to access the S3 Bucket?
        • Configuring ReXgen AIR
          • Mobile Settings
          • AWS Settings
            • Steps to add new AWS settings using ReXdesk
            • Steps to enable AWS configuration in the ReXgen logger
          • Uploading AWS and Mobile settings
      • Deploying Lambda Function To AWS
        • For Beginners
        • For Advanced Users
        • Adding S3 Trigger for Lambda
        • Configuring conversion settings
        • Adding the DBC file for conversion
      • Running ReXcloud Docker Image on a local PC
      • Self-hosting with ReXgen Air - MinIO
        • Step 1 - Allow traffic on port 9000
        • Step 2 - Access MinIO console
        • Step 3 - Create Bucket
        • Step 4 - Create Access and Security Key
        • Step 5 - Adding S3 Settings
        • Step 6 - Load Configuration
      • Setting Grafana Dashboard with Parquet
        • Adding S3 Trigger for Lambda
        • Configuring conversion settings
        • Configuring AWS Glue settings
          • Option 1 - To add data to the database, based on time
        • Setting a Grafana Dashboard using the Athena plugin
      • Setting up FileZilla FTPS
        • Adding users and selecting the directory for saving the file.
        • Configuring ReXgen AIR
          • Mobile Settings
          • FTP Settings
          • Uploading FTP and Mobile settings
Powered by GitBook
On this page
Export as PDF
  1. ReXgen Air - Cloud usage guides
  2. Cloud Usage Guides For ReXgen Air Device
  3. Setting Grafana Dashboard with Parquet
  4. Configuring AWS Glue settings

Option 1 - To add data to the database, based on time

PreviousConfiguring AWS Glue settingsNextSetting a Grafana Dashboard using the Athena plugin

Last updated 1 month ago

Option 1

Once the properties are added, click 'Create schedule'.

Add Schedule properties and click 'Create schedule.'

Click the 'Run' tab and then click 'Run job' to manually run the job; the database will be populated if the parquet files are already available in S3.

Note:

  • The database will be populated only if the parquet files are already available in S3; otherwise, there is no need to run the job manually.

The run screen then displays the active status of the job.

The job is successfully scheduled.

The database details, along with the logger number, are displayed.

Note:

  • Happens only when the job is run manually after creation it will have to wait until the first run.

Click on the logger serial number to get a detailed report.

Click on the 'CRON expressions' to learn more about CRON syntax for assigning a required schedule.

link
Setting a Grefana Dashboard using the Athena plugin