Ask or search…

ReXgen AIR- Product Manual

The product manual for ReXgen Air provides a brief idea of the usage, safety precautions, installation procedures, and operation of the Influx ReXgen Air


This document is intended for professional engineers and academic researchers, allowing them to understand the concept of operating the device and integrating this knowledge into systems with components of other manufacturers.


Translation of the original Product Manual ReXgen Air.
The content of this document, including all brands and trademarks and possibly protected by third-party rights, is subject without limitation to the terms of the valid trademark law and intellectual property rights of their respective registered owner.
© 2022 INFLUX TECHNOLOGY. All rights reserved.


Influx Technology Ltd
Millbrook Proving Ground, Station Lane
Bedford, MK45 2JQ, United Kingdom
Telephone: +44 (0) 1525 842504,


  • Ensure the device is installed, connected, and commissioned by a qualified professional following all safety norms.
  • Disconnect the device completely before handling it, and disconnect any independently supplied output load circuits.
  • Do not connect the housing to the Ground externally. This will suspend the reverse voltage protection of the power supply. Applying a reverse voltage, in this case, will destroy the supply circuits.
  • Provide all the device connectors with plugs and any protection caps required to ensure protection class IP65.
  • Never immerse the device in water or other liquids.
  • The manufacturer must only repair the device.
  • Keep substances that contain solvents away from the type label.
  • Do not use the logger's USB port for data logging purposes, as it may damage the USB port, which won't be covered under warranty.
The following formatting and symbols will help you recognise the purpose of each paragraph:
Notes: Important usage instructions/notes/limits.
Attention: Property damage
Warning: Severe injury or death. Probability: Possible