Configuring Wi-Fi settings to Start up a Pro Device

Open the Wi-Fi settings on your device (laptop, mobile, or tablet).

Select the default serial number of your Pro device, such as 'SN0000005', here. This will open a Wi-Fi configuration window.

Select the Wi-Fi you wish to connect to and click 'Configure'.

Open the Wi-Fi settings on your device (laptop, mobile, or tablet). Select the default serial number of your Pro device. Select the Wi-Fi that you wish to connect to on the Wi-Fi configuration window, and click 'Configure'.

Upon clicking Configure, the 'Wi-Fi hotspot' will get disconnected.

The status of LED 8 indicates the Wi-Fi configuration status. Once the hotspot connection is successful, LED 8 will turn bold after a one-minute pause.

Once the configuration is successful and the device is connected to the specified Wi-Fi.

• Once configured, open the ReXdesk software and click the USB icon on the status bar (located in the lower-left corner).

• Click on TCP/IP and scan for local networks.

• Select the IP of your Pro device, and click Connect.

Select the IP of your Pro device, and click Connect.

Once completed, the status on the status bar is updated to 'CONNECTED'.